3mm Cngrow aluminum mirror is produced by great float glass and  back paintings.

Aluminum mirrors are

widely used for home mirror, bathroom mirror, wall mirror, furniture mirror, etc.

Dimensions of aluminum mirror.

Thickness: 1.8mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm.

Maximum dimensions: 72"x96" (1,830mmx2,440mm).

Regular size: 914x1220mm, 1220x1830mm, 1220x2440mm, 1600x2550mm, 1830x2440mm, etc.

Size tolerance: +/- 1mm.

Further processing: mirror edge can be made into round edge (C-edge), flat edge (V-edge), beveled edge, fluted edge, polished edge, etc.

Various cut sizes are available according to customers' requirements.

Mirror color: bronze, blue, black, golden, green, grey, pink, etc.

Packing: seaworthy wooden crate and with paper interleaved between mirror sheets.

For safety, PE film i usually put on the back og mirror.

 Low iron float glass is a kind of exceeding clarity and low iron glass, which is also called  Ultra-clear float glass, high transmittance glass. It is a new and high-grade type of grass of high quality and with many functions. It features high transmittance and is crystal clear, top-grade and elegant. Besides, ultra-clear glass enjoys all machinable performance owned by superior float glass as well as superior physical, mechanical and optical properties. Due to its superior performance, ultra-clear float glass will be more widely used and has bright market prospect. Low iron float glass is also called ultra clear glass, it can be used as the cover or base glass for the thin film PV, low iron and high light transmission, this product can help improve the conversion of solar energy;

● Application
low iron float glass is widely applied in the following fields of solar energy for its very high sun light and visible light transmittance:
◆ Heat Mirror of Solar Energy
It takes full advantages of extreme reflectivity of ultra-clear glass, improves the concentration effect of sunlight and greatly raises photo-thermal efficiency.
◆ Thin Film Solar Cell
With higher sun light transmittance, it can raise photoelectric transformation efficiency.
◆ BIPV Program
Ultra-clear white glass can be used as both front panel glass of thin-film solar cell and decoration glass for BIPV program. It not only can meet the daylighting needs indoor but also can meet photovoltaic efficacy. So it will be the main trend in the development of building in the future.
◆ Greenhouse Glass
It can accelerate plants photosynthesis and shorten the period of their growth, helping clients to gain more economic benefits.

Specification:

It enjoys outstanding performance such as high sun light transmittance, low absorption rate, low reflectivity, and low iron content and is the most ideal packaging material for solar photovoltaic and photo-thermal transformation systems. It can largely improve photo electric and photothermal conversion efficiency.

1.Thickness: 3.2-8mm ;

2. tempered glass, high strength;

3. Light transmittance≥91.5%;

4.Iron content≤120PPM;

5.The size: Cut according to client’s request. 

6.Edge: Arc shape ground/seemed. 

7.Corner: Cut and round

 We produce many kinds shelf glass, these products can be used for refrigerator ,freezers, wine ark ,reveal ark and so on;

Specification:

1.Thickness: 2-8mm ;

2. tempered glass, high strength;

3.The size: Cut according to client’s request.

4.Edge: Arc shape ground/seemed.

5.Corner: Cut and round

We use the high quality float glass,it can be used in medical, fitness human body and the kitchen use weighing scales,The product can solve the scale to heavy metal shell, appearance, carrying the inconvenience of rough, more to change the scale of aging, plastic deformation and easy to crack, etc.; Exterior is elegant, such as in the glass surface coating membrane of ITO, human body fat is more measured, moisture, weight and versatility

Specification:

1.Thickness: 3-10mm ;

2. tempered glass, high strength;

3.printing: according to re

Frosting glass usually have two method: the acid corrosion frosting method and the blast sanding method. We have much production experience, Frosting glass in adornment space almost everywhere, setting wall, condole top, table, screen, porch, partition, ground, stair, doors and Windows, glass tea table...... Widely used in home, hotel, bar, cafe KTV, large outdoor landscape decorate. Frosting glass will indoor and external landscape through art adornment combined together, greatly improving the space decorate class.

The feature:
1.Size: 1500x2000, 1700x2000, 1800x2400, 1830x2440
2.Thickness: 4mm-10mm
3.Color: Clear, bronze, grey
4. Float and smooth surface
5. Excellent optical performance
6. Stable chemical properties and high mechanism
Glass surface is flat, no optical deformation, high visible light transmittance, can reproduce the perfect landscape qualities, using online realtime digital image recognition technology in the production process to detect defects in the glass 0.1mm diameter

We use the high quality float glass and through special production process to assure the quality, mainly used in thin film solar cell, we can manufacture according to the requirement of customer, The advanced imported equipment ensures the fine processing precision. Our products already supply for many famous PV company;

 Specification:
1.Thickness Range: 2mm~10mm
2.Regular Thickness: 3.2mm/4mm/5mm
3.Max size: 2600*2200mm
4.Hole Diameter: 10~50mm
5. tempered glass, high strength;

Low iron patterned glass also can be said :Ultra-clear PV glass. It is mainly used as sealing glass of solar cells and is an indispensable part of photovoltaic solar cells. It enjoys outstanding performance such as high sun light transmittance, low absorption rate, low reflectivity, and low iron content and is the most ideal packaging material for solar photovoltaic and photo-thermal transformation systems. It can largely improve photo electric and photothermal conversion efficiency.
Specification:
(1) The thickness: 3.0mm/10mm; standard thickness: 3.2mm/4.0mm
(2) Maximum size: 2200﹡3300mm
● Main Performance
1. Glass density: ≈2.5g/cc
2. Solar transmittance (3.2mm): ≥91%
3. Glass iron content: ≤120ppm
4. Poisson's ratio: ≈0.2
5. Young's modulus of elasticity: ≈73GPa
6. Tensile strength: ≈42MPa
7. Hemispherical emissivity: ≈0.84
8. Expansion coefficient: 9.03×10m/k
9. Softening point: ≈720℃
10. Annealing point: ≈550℃
11. Strain point: ≈500℃

 Now we developed one new solar glass for PV,AR coating on low iron float glass ,that can be used for thin film module as top plate, c-Si module as cover plate ,thermal collectors as top plate, display cases &show-rooms as front glass ;This new solar PV glass is of longer working life, higher solar transmittance, enhancing battery modules’s  output,overall outperforming low iron rolled glass in PV application;This product also can be used on screen glass to improve the color saturation;

  Specification:

     1.hard AR coating: integrated with super low iron float:Tpv:92.4%,Tvis:93%,the output power is increased as much as 3w for thandem-junction thin film solar cells based on Oerlikon Solar’s applied technology;

     2.Durable:fit stabdard ,superior comparison results,  anti-corrosion effectively 10 times more power than wet AR coating’,and blocking glass surface;

     3.Maneuverability:covenient in secondary processes,handling,easy tobe packed,stored and transported;

 4.Thickness:3.2mm,4mm;

 5.Dimension:according to your requirement;

Tempered glass:

Our fully tempered glass offers customers the following safety characteristics:
-4-5 times stronger than annealed glass of the same thickness
-Stronger resistance to thermal breakage than annealed or heat-strengthened glass
-If breakage occurs, the glass breaks up into small, cubical fragments, which are not threatening to humans.

Order of nonstandard size: Customized can be available according to the clients'requirements, when the amount is up to the quantity standard.

Thickness of glass: 3mm - 10mm.

Range of application: Construction, furniture, electrical appliance, etc.

Edge:  straight polished edge, polished C-edge, beveled edge, rough edge.
*All work done on glass (beveling, cutting, bending, etc.) must be done before tempering

Qingdao Cngrow Technology Glass Co.,Ltd  is a temperd glass manufacturer locating in Qingdao City,Shandong Province,China.Our main products includes 3mm,3.2mm,4mm,5mm,6mm,8mm clear and tinted tempered glass,3.2mm,4mm low iron solar glass,2mm-19mm clear or tinted float glass,3-8mm silver mirror and aluminum mirror,3-8mm patterned glass and 3-8mm reflective glass.

We use the high quality float glass, through special produce process to assure the good quality,Widely used in electronics, electric appliances, instruments and meters, display protection, and so on screen. Such as the CRT, LCD, PDP, flat-panel computer monitors, scanner, copy machine, electrograph, high-grade instrument panel, etc

By toughened glass processing technology, the glass machinery strength greatly raised, full toughened glass enhance 3-5 times, semi-tempered glass enhance 2.5 times; After the broken pieces in a granular, not easy to hurt, belongs to the safety glass. JMT product is the best LCD screen protection materials, resistance to impact strength is LCD screen more than 40 times the motherboard, and through the printing technology in the glass surface into different kinds of high-grade art adornment effect

specification:

1. thickness 2 mm-19 mm

2. size:15, 17 and 19, 22, 26, and... 120 inches (according to customers' special requirements);

3. tempered glass, high strength;

4. printing: according to requirement;

5. Edge: Arc shape ground/ Straight edge

6. Corner: Cut and round

1. 3/8" Tempered Glass for Showeroom
2. 18 years' experience
3. CCC & EN
4. Dockside warehouse
5. Over 75 countries' buyers

 The Anti-Glare glass through a special glass products made with chemical process, its characteristic is the reflective glass surface into a dumb light diffuse surface. Can make the glance influence fuzzy, prevent glare outside also that the photometric drop, reduce lighting, this product surface anticorrosive, prevent scratch performance is strong. Combined with video imaging screen can form a transparent the glare, and the reflection screen, solve the screen, the video screens in electronic environment light produce reflective, glare issues, improve picture quality image.

Application: it is widely used for PDP , TV, PTV, touch screen,, flat TV, LCD monitor, touch screen, industrial instruments and so on

Specification(single glare):

We can be customized according to the requirements of clients;

This is an ordinary float glass with a metallic coating to reduce solar heat. This special metallic coating also produces a mirror effect, preventing the subject from seeing through the glass. It is mainly used in façades. Production Pyrolitic (On-Line): in this process, semi-conducted metal oxides are directly applied to the glass during the float glass production while the glass is still hot in the annealing lehr. These are hard coatings which are relatively harmful to the environment. Vacuum (magnetron) Process (off-line): in this process one or more coats of metal oxide are applied under a vacuum to finished glass. The coatings applied by this technique are soft and must be protected against external influences and are therefore used for the interior side of glass panes. There are some other techniques for the OFF-LINE coating:

• Immersion Process


• Chemical Process


• Foil


• Screened Glazing

Colors
1. Blue: Sky Blue; Lake Blue; Dark Blue; Royal Blue
2. Grey: Euro Grey; Dark Grey, Mist Grey
3. Green: F. Green (Light Green), Dark Green
4. Bronze: Golden Bronze, Red Bronze
5. Pink
6. Golden
7. Clear etc.

Size
1524*2134mm, 1650*2140mm, 1650*2440mm, 1830*2440mm, 3300*1900mm, 3210*2140mm, 3300*2134mm, 3210*2250mm, 3300*2250mm, 3660*2134mm, 3660*2250mm etc.
Thickness
3mm, 4mm, 5mm, 5.5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 19mm etc.

Applications
1. External use of windows, doors, shopfronts in offices, houses, shops etc.
2. Interior glass screens, partitions, balustrades etc.
3. Shop display windows, showcases, display shelves etc.
4. Furniture, table-tops, picture frames etc.

1. 4mm Clear Float Glass
2. 18 years' experience
3. ISO9001 & CE
4. Dockside warehouses
5. Over 75 countries' buyers

We supply 1.1mm-19mm CLEAR FLOAT GLASS and TINTED FLOAT GLASS (EURO/DARK BRONZE, FORD/DARK BLUE, FRENCH/DARK GREEN, EURO/DARK GREY).

Clear Float Glass is distortion-free, precision flat and transparent glass. It is made of molten glass which flows through tweel to tin bath and then to lehr. While floating through the molten tin, the glass under the works of gravity and surface tension becomes smooth and flat at both sides.

Body tinted or heat absorbing glasses are produced by the float process with the addition of small quantities of metal oxides to color the normal clear glass mix. This coloration is achieved through adding metal oxides at the smelting stage.

Colors

1. Blue: Sky Blue; Lake Blue; Dark Blue; Royal Blue
2. Grey: Euro Grey; Dark Grey, Mist Grey
3. Green: F. Green (Light Green), Dark Green
4. Bronze: Golden Bronze, Red Bronze
5. Pink
6. Golden
7. Clear etc.

Clear Float Glass is distortion-free, precision flat and transparent glass. It is made of molten glass which flows through tweel to tin bath and then to lehr. While floating through the molten tin, the glass under the works of gravity and surface tension becomes smooth and flat at both sides.

Body tinted or heat absorbing glasses are produced by the float process with the addition of small quantities of metal oxides to color the normal clear glass mix. This coloration is achieved through adding metal oxides at the smelting stage.

Colors

1. Blue: Sky Blue; Lake Blue; Dark Blue; Royal Blue
2. Grey: Euro Grey; Dark Grey, Mist Grey
3. Green: F. Green (Light Green), Dark Green
4. Bronze: Golden Bronze, Red Bronze
5. Pink
6. Golden
7. Clear etc.

Applications:

• Shower doors and tub enclosures
• Patio furniture
• Interior partitions
• Translucent door treatments
• Decorative furniture
• Palladium windows
• Lighting fixtures
• Foyers and vestibules

Solar mirror is a mirror of the world's leading new environmental protection product. We use 3.2 mm low iron super white glass, and use the no copper of lead-free technology, environmental pollution free method, Mainly applies in the new solar power generation equipment, good resistance to high temperature resistant, wind and sand, resistance to ultraviolet radiation, high efficiency, environmental protection, and other advantages, is widely used in the united Arab emirates, Israel and sunny countries and regions.

The features:

1.high reflectivity and energy efficiency, maximum utilization of solar energy;

2. high temperature resistance, resistance to sandstorm, can be in high temperature and high pressure of desert area use;

3. high strength, not changeful form, not easy and broken;

4. fight ultraviolet ray;

5.environmental pollution free.

6.thickness:3.2mm

We use the high quality float glass, through excellent design and fine processing. It will not be damaged by 1040g steel ball falling from 1000mm height, it can be used as the frame component. It will not be damaged by 1040g steel ball falling from 1000mm height, it can be used as the the frame component. It has some advantage, such as: beautiful appearance, anti-humidity and keeping clean. Besides, fruitful design, lower cost and no mold. It is the best replacement for plastic base. Mainly used in TV, computer, sound box and electric fan etc.

Specification:

1.Thickness: 3-10mm ;

2. tempered glass, high strength;

3. Product posted a protective film and anti-blast film;

4. Hole Diameter: 3~50mm

5.The size: Cut according to client’s request.

6.Edge: Arc shape ground/seemed.

 The color printing glass can be used for the refrigerator, air conditioner, furniture, microwave oven, etc , We have full automatic production line of silk screen, can be low and high temperature printing, the products have been widely used in home appliances, furniture, and other industries;

Specification:

1.Thickness: 2-10mm ;

2. tempered glass, high strength;

3. Design: according to customer requirements ;

4. Colourful, high adhesion;

5.The size:  according to client’s request.

6.Edge: Arc shape ground/seemed.

7.Corner: Cut and round

AR glass also can be said minus reflection transmission glass, it is a kind of glass surface special treatment of glass. Its principle is the high quality glass one-sided or two-sided for processing. Compared with the common glass has lower than the reflection, make light of the dependence of the dropped below 1%, common glass in visible range, it's unilateral reflectivity is about 4%. The spectral reflectance of about 8%. The glass surface in visible within the scope of the reflection effects can be reduced by two methods to realize; A kind of for use of different optical materials from the membrane of the interference effect to eliminate the incident light and reflected light, so as to improve the method of through rate, such use light destructively interfere in the production of glass called AR glass; .

Product features:

"Visible light transmittance peak 99%,  visible through rate of more than 95% on average, greatly improve the LCD, PDP original brightness, and has reduced energy consumption.

"The average reflectivity below 4%, the lowest is less than 0.5%

"Effective because of strong light lead to weaken behind the picture turned white regret, enjoy a clear image quality.

"Ultraviolet, and effectively protect eyes ultraviolet spectrum area through rate plummeted, and can effectively block absolutely ultraviolet light to the eyes of the damage.

"High temperature resistant, AR, glass temperature > 500 degrees (general acrylic can only temperature 80 c)

"More gorgeous color, contrast, stronger, makes the image color contrast more intense, scenery more clearly.

"The scraping the wear resistance of the best, AR, glass film of hardness and glass quite, more than 7 H, (general PC board hardness of about 2 H to 3 H).

"Resistant to all kinds of cleaner cleaning acid or alkali of cleaning agents to wipe, membrane layer are not damaged.

"Impact resistance is strong, 3 mm thickness of glass equivalent to 6 mm impact acrylic.

"Keep perspective, general acrylic after install, the perspective will be smaller; And AR glass after mount, the perspective will not smaller.

"AR glass can be eliminated almost regardless of cold and heat deformation, applicable to all kinds of environment; At the same time, AR glass has colored glaze feeling, appearance more beautiful.

"AR glass surface smoothness is far superior to the acrylic coating, and size is larger, the more obvious difference.

Application:

Mainly used for protection of screen display device such as LCD TV, PDP television, laptop, desktop computer screen, high-grade instrument panel, touch screen, picture frames, such as glass, improve the transmission rate drop low reflectivity of electronic products.

Specification: 2-6 mm thickness, can be customized according to the requirements of clients;

 AR coating solar glass

AR coated glass developed by our company is a kind of product formed relying on the world’s leading technology and equipment after the surface of high-transmitting ultra-clear solar glass is plated with one layer of anti-reflection film before the glass is tempered. Such glass can well effectively reduce the reflectance of glass surface and improve transmittance, so as to raise the conversion efficiency of modules and improve the output power of PV modules. Besides, it can self-clean the surface. It is the world’s advanced technology and product.

Technology Introduction
This anti-reflection film relies on advanced nanoporous silica technology. By controlling the sizes and accumulation forms of silica particles, it obtains nanoporous materials with uniformly distributed nanoscale on the surface of ultra-clear glass. The reflectivity of film is reduced to about 1% and the reflectivity of solar energy is largely reduced, so as to improve the solar transmittance and eventually improve the conversion efficiency of solar modules.

● Product Advantage
1. It adopts glass components with low content of iron. The transmittance is thus higher and module conversion efficiency can be effectively improved. 
2. The surfaces of glass are processed with nano-materials to form highly effectively antireflective film. The transmittance is increased by about 2.54% (compared with uncoated glass). 
3. The surfaces of glass are melted and specular reflection changes into diffuse reflection to reduce light pollution to the environment. 
4. It is tempered at high temperature. The film and glass bind firmly. 
5. The film is well resistant to acid and alkali under bad outdoor conditions. 
6. The film has self-cleaning function. It is able to decompose organic pollutes adhering to the surfaces of modules so that maintenance of modules can be reduced. 
7. The antireflective film absorbs little light. The antireflection effects will not be affected when reflection is reduced. 
● Specification and Packaging
1. Thickness: 3mm～10mm, standard thickness: 3.2/4.0mm
2. Maximum size: 1600mm﹡2100mm
3. Glass packaging: It is packaged in carton or wooden case. It can also be sealed with aluminum foil for packaging.

Features of silver mirror.
Silver mirror is also called waterproof mirror, water silver mirror, silver-coated mirror, glass mirror, etc.                                                                                                                                                                     

Cngrow silver mirror is produced by high-quality clear float glass  as sheet and through washing, polishing, activation, silver-coating, copper-coating, then finished with two waterproof layers of paint for protection. It adopts the chemical plating method, i.e. silver coating that using reducer react with AgNO3, and getting a thin layer of silver as the reflective material on the clean glass surface, copper coating, and then first time paint coating, drying, and then the second time protective paint coating.

Dimensions of silver mirror.                                                                                                             Thickness:1.5mm,1.8mm,2mm,3mm,4mm,5mm,6mm,8mm.
Maximum dimensions: 96"x144" (2440mmx3660mm)
Regular size: 1220x1830mm,1600x2550mm,1830x2440mm,2134x3050mm,2250x3210mm, etc.
Size tolerance: +/- 0.2mm.
Further processing: mirror edge can be made into round edge(C-edge), flat edge(V-edge), beveled edge, fluted edge, polished edge, etc. Various cut sizes are available according to customers' requirements. Mirror color: bronze, blue, black, golden, green, grey, pink, etc.                                                                                                                                                                           

Packing: seaworthy wooden case and with paper interleaved between mirror sheet.

Application range of silver mirror.

Cngrow silver mirror with fidelity image and high reflectivity, reflecting rate is about 93%. It's widely used as a raw material in furniture mirror, cheval mirror, bathroom mirror, framed mirror, wall mirror, dressing mirror, slide door mirror, makeup mirror, optical mirror and rearview mirror of automobile, etc.
1. Traffic vehicles, such as the windows of train, bus, car, etc.
2. Architecture, such as windows or interior decoration of buildings (store, gymnasium, bathroom, washroom, etc).
3. Household appliances and furniture, such as glass table top and show shelves.
4. The mirror can be made into safety mirror through sticking special PE film in the backside (both CATI and CATII are available).
5. Lead and copper free mirrors are available. Lead free mirror can minimize the pollution to the environment and it's satisfied with the environmental requirements in Europe, America and other developed region. Quality control. Quality standard up to Q/320583 QYCF001-2000.

Storage notice.
1. The storage or warehouse must be dry and a constant temperature maintained to avoid paint bubbles or color change.
2. Large mirror sheet should be placed in safe area, and do not store in outdoors.
3. Far away from heat and any kind of chemical such as acid, alkali, fuel, putty and various organic solvents or vapors, etc.
4. Placed vertically with paper interleaved.

 Technology specifications of anit-glare glass:

The anti-glare glass can be processed into different sizes according to different request.

Insulating GlassInsulating glass (also referred to as insulated glass) refers to two or more lites of glass sealed around the edges with an air space between, to form a single unit. 

 Insulating glass is the most effective way to reduce air-to-air heat transfer through the glazing.  When used in conjunction with low-E and / or reflective glass coatings, IG units become an effective means to conserve energy and comply with building codes. 

Tempered glass:

Our fully tempered glass offers customers the following safety characteristics:
-4-5 times stronger than annealed glass of the same thickness
-Stronger resistance to thermal breakage than annealed or heat-strengthened glass
-If breakage occurs, the glass breaks up into small, cubical fragments, which are not threatening to humans.

Order of nonstandard size: Customized can be available according to the clients'requirements, when the amount is up to the quantity standard.

Thickness of glass: 3mm - 8mm.

Range of application: Construction, furniture, electrical appliance, etc.

Edge:  straight polished edge, polished C-edge, beveled edge, rough edge.
*All work done on glass (beveling, cutting, bending, etc.) must be done before tempering*

Tempered glass:

Our fully tempered glass offers customers the following safety characteristics:
-4-5 times stronger than annealed glass of the same thickness
-Stronger resistance to thermal breakage than annealed or heat-strengthened glass
-If breakage occurs, the glass breaks up into small, cubical fragments, which are not threatening to humans.

Order of nonstandard size: Customized can be available according to the clients'requirements, when the amount is up to the quantity standard.

Thickness of glass: 3mm - 8mm.

Range of application: Construction, furniture, electrical appliance, etc.

Edge:  straight polished edge, polished C-edge, beveled edge, rough edge.
*All work done on glass (beveling, cutting, bending, etc.) must be done before tempering*

Laminated Glass is two or more sheets of glass bonded together by a single or multiple interlayer’s to produce a desired outcome. The benefits of laminated glass are plentiful ranging from strength and safety under impact, through to custom colors, custom designs and energy

Cngrow Glass  offer laminated glass in a wide range of colors, thicknesses and sizes. We cut, shape, drill and bend laminated glass to your  requirements. Our processing is performed on CNC machines ensuring that the finished product is exactly what you have ordered.

We can laminate many of our glass types including combination’s of glass types giving you the energy efficiency; glass performance and aesthetic that you need to make your next project special. Triple laminated glass is also available and is often used on stairs, Pool ends and Aquariums.

Laminated glass can be supplied in our Insulated Glass Units which can also be bent for curved glass applications.

Our PVB interlayer’s are supplied by leading manufacturers such as Du Pont, Solutia and Saflex and include the Vanceva range of colors

Glass types that we laminate include:

• Low-e Glass
• Toughened glass
• Heat Strengthened glass
• Annealed Glass
• Solar reflective glass
• Sunergy glass
• Colour Palette coloured interlayer’s
• Curved Glass
• Acid etch glass
• Ceramic frit patterned glass
• Bullet resistance glass

Laminate glass is available in many combination’s including:

• Thickness from 4mm to 100mm  including 6.38, 8.38, 10.38,12.76,15.52,25.52, 31.52, 38.52mm etc.
• PVB supplied by multiple companies including Du Pont, Solutia, Saflex and Beidou.
• PVB membrane colors: clear, milky white, grey, blue, green, red, yellow etc.
• PVB membrane thickness: 0.38 to 3.04mm.
• Toughened laminate glass Safety glass From 9.52 mm.
• Heat strengthened laminate glass.
• Panels up to 4500mm x 2500mm.
• Tints available in green, blue, grey, black, brown, purple, red, yellow, golden, marble effect and patterns.
• Holes, simple and complex cut outs, rakes.
• Flat edge polish, bevel edged.

Laminated Glass Performance Levels according to Thickness

Laminated Glass Assembly According to Safety Requirement

Tempered glass:

Our fully tempered glass offers customers the following safety characteristics:
-4-5 times stronger than annealed glass of the same thickness
-Stronger resistance to thermal breakage than annealed or heat-strengthened glass
-If breakage occurs, the glass breaks up into small, cubical fragments, which are not threatening to humans.

Order of nonstandard size: Customized can be available according to the clients'requirements, when the amount is up to the quantity standard.

Thickness of glass: 3mm - 8mm.

Range of application: Construction, furniture, electrical appliance, etc.

Edge:  straight polished edge, polished C-edge, beveled edge, rough edge.
*All work done on glass (beveling, cutting, bending, etc.) must be done before tempering

Tempered glass:

Our fully tempered glass offers customers the following safety characteristics:
-4-5 times stronger than annealed glass of the same thickness
-Stronger resistance to thermal breakage than annealed or heat-strengthened glass
-If breakage occurs, the glass breaks up into small, cubical fragments, which are not threatening to humans.

Order of nonstandard size: Customized can be available according to the clients'requirements, when the amount is up to the quantity standard.

Thickness of glass: 3mm - 8mm.

Range of application: Construction, furniture, electrical appliance, etc.

Edge:  straight polished edge, polished C-edge, beveled edge, rough edge.
*All work done on glass (beveling, cutting, bending, etc.) must be done before tempering*

Specifications 3.2mm tempered patterned low iron glass 1.low iron glass 2.ultra-clear glass 3.thickness:3.2mm 4mm 4.patterned glass/float glass Solar glass is also called photovoltaic glass which mainly used on solar panel because of its super light transmittance rate. Solar panel is a thin layer of optoelectronic semiconductor which converting solar energy into electricity. By considering its efficiency, we are using High- transmittance and low reflection glass for its panel. This high strength glass maintains the best image quality by eliminating unwanted distortions with the advanced optical technology. Types Available: LOW IRON PATTERNED GLASS (Annealed or Tempered) LOW IRON FLOAT GLASS (Annealed or Tempered) FEATURES: 1. High light transmission, more than 91.6%. 2. Low optical defects, comply with EN572-5/94. 3. Easily to be cut, coated and tempered. SPECIFICATION: Thickness: 3.2mm Size: Cut according to client’s request. Edge: Arc shape ground/seemed. Corner: Cut and round

• Continuous Tempering Furnace can produce 3mm -12mm tempered glass
• Tempered glass is produced by heating annealed glass in a furnace to 620°C. Progressing from the furnace, the glass is rapidly cooled with jets of cold air, inducing compressive stresses to the surface while the center remains tensile.
• 5-8 times stronger than annealed glass of the same thickness.
• Stronger resistance to thermal breakage than annealed or heat strengthened glass
• If breakage occurs the glass breaks up into small, cubical fragments, which are not threatening to humans.
• All work done on glass (beveling, cutting, bending, etc) must be done before tempering.

Single coated, high quality float aluminum  mirror,
Thickness:2mm, 3mm, 4mm, 5mm, 6mm,
Sizes: 2134/2250x3300mm,2440x1830mm etc

Cngrow Aluminum  mirror  is produced through a trinal processing work by coating a aluminum  film, a copper film, and two layers of waterproof paints on the surface of glass.

FEATURES:

1)      Mirrors suit all atmospheric conditions.

2)      The mirror surface is clear and bright, giving distinct and lifelike image.

3)      The plating layer is rigid and bond and the protective layer impregnable with good erosion-resistance.

Silver Mirror
FEATURES:
1. Made of waveless float glass

2. Double coated paint

3. Exact image, high reflectivity, reflection ratio is about 93%.

4. The mirror can be made into safety mirror through sticking special PE film in the backside (both CATI and CATII are available).

5. Deep processing, can be cut into any size and any shape and sand blast process is available.

6. Polished edge processing, round edge, flat edge and beveled edge, etc.

7. Packing, seaworthy wooden cases with paper interleave.

SPECIFICATIONS:
Standard sizes: 1220x1830mm, 1600x2250mm, 1600x2550mm, 1650x2200mm, 1830x2440mm, 2134x3050mm, 2134x3300mm, 2250x3210mm, 2440x3300mm, etc.